kasceoasis.blogg.se

#Bartender 2 resetting how to#
#Bartender 2 resetting install#
#Bartender 2 resetting drivers#
#Bartender 2 resetting driver#
#Bartender 2 resetting manual#

This means the printer looks for gaps between labels to know where to print. Most labels are printed using the “Web Sensing” option.

#Bartender 2 resetting driver#

The Seagull Printer Driver allows you to “Use current printer settings” with your label format, or over-write them with new ones. Zebra printers will retain setting information until they are factory reset, or until those settings are over-written with new ones. This will most often be used to try to solve calibration or print quality issues. Adjusting the Printer SpeedĪlso on the “Options” tab of your Seagull Printer Driver, you can adjust the speed that your printer runs.

This option won’t be available for TSC printers. EIM also recommends using the “Absolute” option rather than “Relative” for consistent printing. Note: You will have to uncheck the box that reads “Use Current Printer Settings” to be able to adjust the darkness slider. recommends you run various tests with different heats, and choose the lowest heat setting that gives you a print quality you are happy with. Here, you have a slider that goes from 0 to 30 as a heat adjustment.

#Bartender 2 resetting how to#

Fortunately, Seagull’s printer driver allows you to adjust the heat under the “Options” tab in “Document Properties” (See previous page on how to access the driver settings). Often, the default heat setting is not sufficient to gain a quality print, especially on polyester labels. “Print head heat”, “Darkness”, and “Intensity” are all different terms for the amount of energy the printer is told to use to transfer ribbon ink onto your label stock. Some, but not all, of the settings you can adjust are listed below – starting with the most commonly used: Adjusting the Print Heat and Darkness Regardless of the way you access the driver settings you will bring up another pop-up where printer settings can be adjusted. You can also access these settings by right clicking on your printer in your Windows Printer Menu and selecting “Printing Preferences”. Click the “Document Properties” button on this page. The easiest way to access the driver to adjust settings is through your Print Prompt – that is, the screen you see where you specify the number of labels to print. As well as the ability to send helpful commands to the printer such as Run Calibration and Reset to Factory Defaults. Seagull’s printer driver for Zebra printers offers many user-friendly settings adjustments – including print speed, print direction, sensor settings, and printhead heat settings. Note: If Windows automatically installed your printer upon connection, it is likely to have used the Zebra or other manufacturer driver, and we recommend following the steps above to re-install or replace your printer driver with the Seagull version.

#Bartender 2 resetting install#

Once your printer is installed, and ribbon and labels are loaded, please see the sectionbelow on calibrating your printer (Page A5).įor instructions on installing the printer using the Windows Add Printer Wizard (rather than the Seagull Driver Install Wizard), please see Page D6 under out troubleshooting section.

Name your printer, or leave the default name.

Specify on which port your printer is connected to your computer, USB or LPT.

If given the option between installing an EPL or ZPL version of your printer, we commonly recommend ZPL.

Select Zebra as your manufacturer and choose your printer model from this list.

#Bartender 2 resetting drivers#

Use the online download to unpack the Seagull Drivers to your computer and run the Driver Installation Wizard to install your printer.

#Bartender 2 resetting manual#

If not done already, plug in your printer’s power, connect it to your computer via USB or parallel cable, and power on your printer – For assistance on this step, see the GX430 manual pages in Section B.

The Seagull print drivers are installable from any BarTender® CD for customers who have ordered BarTender®, but they are available for no cost at Seagull’s Website. This Windows-compatible driver works well for printing from BarTender®, Microsoft Word, and most any other Windows program that can be printed from. If you are using your label printer with print software besides manufacturer specific programs like Zebra’s ZDesigner, we recommend you install and use Seagull’s printer driver. BarTender® Technical Support Installing the Printer with the Seagull Printer Driver: